EO Mini Pro 2 - Charging a Vehicle; Tethered Cable Storage; Cleaning the Unit

EO Mini Pro 2 Installation & User Guide
© EO Charging 2020
7.1
Charging a vehicle.
In order to charge a vehicle, the following steps
should be followed:
+ Turn on the EO Mini Pro 2.
+ Plug the charging cable into vehicle.
+ Plug the charging cable into EO Mini Pro 2
(not applicable if a tethered unit is installed).
+ The Vehicle should start to charge
immediately or will charge at the scheduled
time.
In order to stop a charging session, the following
steps should be followed:
+ Stop the charging session from the vehicle
e.g. unlock the vehicle.
+ Remove the cable from the vehicle.
+ Remove the cable from the EO Mini Pro 2
(not applicable if a tethered unit is installed).
7.2
Storage of tethered cable.
When not in use, the tethered cable should be
wound up and stored on a locally provided hook.
The plug should latched into the plug holder on
the front of the EO Mini Pro 2.
7.3
Cleaning.
It is recommended to periodically clean the
terminals of the socket with a suitable solvent
based cleaner to ensure that the socket is free
from dirt and other contaminates.
24