EO Mini Pro 2 Installation & User Guide
© EO Charging 2020
The colour of the LED should be interpreted as follows:
8.1
Power Up.
When the unit is powered up the following sequence should be observed:
LED Colour State Notes
Not illuminated Power OFF No power is available
LED solid RED Initialising Initialising
LED pulses BLUE Ready
Unit has started up successfully and is
ready to charge
8.2
Normal Operation.
LED Colour State Notes
LED pulses BLUE Ready Ready to charge
LED pulses GREEN Cable is inserted
EO Mini Pro 2 is communicating
with the vehicle and trying to
start a charging session
LED solid GREEN Charging
A charging session has started
successfully
LED pulses BLUE Cable is removed Ready to charge
LED solid YELLOW PAUSED
The EO Mini Pro 2 has been
put on pause by a schedule
or the Pause button or Load
Management
24
To Next Page
Loading...
