EPAX E6 Series - Table of Contents

www.epax3d.com
It is strongly recommended that you watch our tutorial videos before
operating your printer for the first time.
For additional instructions, videos, and resources, please visit www.epax3d.com and visit the
Support section.
Table of Contents
Section I. Technical Specifi
cations…………………..………………….……………………………..
Section II. Touchscreen Menu Structure…………………………….…….…………………………..
Section III. EPAX Resins………………………………………………………………………………...
Section IV. Slicing Software - ChiTuBox……...………………………….……………………….…...
Installation…………………...…………………………………….……………………….……..
Slicer Settings……………………...………………………………………………………….....
Print Settings……………………...………………………………………………………….…..
Slicer Operations………………..……………………………………………………….……....
Section V. The Printing Process.……………………………………………………………….……....
Post-Processing…………….…………..……………………………………………….……….
Section VII. Troubleshooting…….…………………………………………………………….…….….
Section VII. Warnings…………………………………….……………………………………….……..
Warranty and Return Information……………………………………………………………………....
2
5
6
7
7
7
9
11
14
16
17
18
19
1