EasyManuals Logo

Ephoca HPAC 2.0 Installation Manual

Default Icon
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
ATTENTION
Please read this entire guide (both the installation and operation portions) thoroughly prior to installation. Pay careful
attention to all safety warnings and notices.
As a professional installer you have an obligation to know the product better than the customer. We cannot overemphasize
the importance of proper installation.
It is the installer’s responsibility to properly install the unit. Installation must be in conformance with all applicable local and/or
national codes.
Often during installation or repair it is possible to place yourself in a position which is more hazardous than when the unit is in
operation.
It is your responsibility to install the system safely and to know it well enough to be able to instruct a customer in its safe use.
The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there is a
direct conflict between existing practices and the content of this manual, the precautions listed here take precedence.
WARNING
READ AND FOLLOW THIS MANUAL
Please read this manual thoroughly prior to installation and
operation. Failure to do can result in damage to the unit, damage to
property, personal injury or death
WARNING
EXCESSIVE WEIGHT HAZARD
Use two people when lifting and installing the unit. The unit is
unbalanced on the right (compressor side) Failure to do can result in
back or other injury.

Other manuals for Ephoca HPAC 2.0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ephoca HPAC 2.0 and is the answer not in the manual?

Ephoca HPAC 2.0 Specifications

General IconGeneral
BrandEphoca
ModelHPAC 2.0
CategoryHeat Pump
LanguageEnglish