VEHICLE CLEANING AND CARE
VECHILE CLEANING
WARNING To reduce the possibility of severe injury or vehicle damage, read and understand all
instructions supplied by manufacturer of pressure washer.
CAUTION When pressure washing exterior of vehicle, do not use pressure in excess of standard
requirement. To reduce the possibility of cosmetic damage, do not use any abrasive or reactive solvents
It is important that proper techniques and cleaning materials be used. Using excessive water pressure may cause
severe injury to operator or bystander, damage to seals, plastics, seat material, body finish or electrical system.
Do not use pressure in excess of standard requirement to wash exterior of vehicle.
Clean windshield with lots of water and a clean cloth. Minor scratches may be removed using a commercial
plastic polish.
Normal cleaning of vinyl seats and plastic or rubber trim requires the use of a mild soap solution applied with a
sponge or soft brush and wipe with a damp cloth.
The painted surfaces of the vehicle provide attractive appearance and durable protection. Frequent washing with
lukewarm or cold water and mild detergent is required to preserve the painted surface.
Occasional cleaning and waxing with non-abrasive products designed for ‘clear coat’ automotive finishes will
enhance the appearance and durability of the painted surfaces.
Corrosive materials used as fertilizers or for dust control can collect on the underbody of the vehicle. These
materials will cause corrosion of underbody parts unless flushed occasionally with plain water. Thoroughly clean
any areas where mud or other debris can collect. Sediment packed in closed areas should be loosened to ease its
removal, taking care not to chip or otherwise damage paint.
Lubrication maintenance
● The brake fluid of electric vehicles is checked once a month, and if there is a shortage of fuel, it must be
added in time (the lack of fuel will affect driving safety).
● Grease for the front wheel hub, front wheel bearing, brake pedal linkage, and steering system will be refilled
once next year. The oil product model 3# general lithium-based grease. The transmission gear oil is replaced
once a year. Users can choose gear oils with different viscosity levels according to the atmospheric temperature
in the region.
GL-4 90 (used in southern or northern summer) GL-80W/90 (severe cold area or northern winter, -35℃ or
below)
To Next Page
Loading...