Epiq Solutions Sidekiq X4

Summary

Details specifications for the RF receivers, including tuning range, sample rate, and input signal limits.

RF TRANSMITTER SPECIFICATION (TX1, TX2)

CLOCK AND SYNCHRONIZATION SPECIFICATION

GENERAL HARDWARE SPECIFICATIONS

HARDWARE INTERFACES

TRI-COLOR STATUS LED

Describes the triple-color status LED controlled by GPIO signals, indicating the card's operational status.

J1 (TXA2) Interface

Details the MMCX jack connector for the TxA2 antenna port, providing RF output path for signals between 1 MHz and 6 GHz.

J2 (RXA1) Interface

J3 (RXA2;OBSRXA) Interface

J4 (TXA1) Interface

REF INPUT Port

PPS INPUT Port

J5 (TXB2) Interface

J6 (RXB1) Interface

J7 (RXB2;OBSRXB) Interface

J8 (TXB1) Interface

RF SHIELD & HEATSINK

VITA 57.1 HPC CONNECTOR

SUPPLEMENTAL HEAT TRANSFER SURFACE

FMC PIN MAP

FMC LOW PIN COUNT (LPC) SECTION

Details pin assignments for the FMC Low Pin Count (LPC) connector, including signal names and standards.

FMC HIGH PIN COUNT (HPC) SECTION

BASIC USAGE IN A HOST SYSTEM

HOST SYSTEM COMPATIBILITY

Describes the general architecture and host system requirements for deploying Sidekiq X4.

OPERATING SYSTEM COMPATIBILITY

POWER CONSUMPTION

THERMAL DISSIPATION

JTAG ACCESS ON SIDEKIQ

SIDEKIQ X4 MECHANICAL OUTLINE

SIDEKIQ X4 THUNDERBOLT 3 PLATFORM

OVERVIEW

Introduces the Sidekiq X4 Platform Development Kit (PDK) and its integration with a Thunderbolt 3 chassis.

BASIC USAGE THE SIDEKIQ X4 THUNDERBOLT 3 PLATFORM

ACCESSING JTAG ON THE SIDEKIQ X4 THUNDERBOLT 3 PLATFORM

APPENDIX A - SIDEKIQ X4 STATEMENT OF VOLATILITY

APPENDIX B - FAILURE RATE & MTBF