EasyManua.ls Logo

Epiroc EC Series - Truck Transport and Installation; 4.3 Transport Using a Truck

Epiroc EC Series
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety and operating instructions
© Construction Tools GmbH | 33905146 01 | 2019-09-05
Original Instructions
23
4.3 Transport using a truck
WARNING Hydraulic attachment tipping over /
slipping
The hydraulic attachment slipping or tipping over and
falling from the loading area of a lorry may cause serious
injury.
u Place the hydraulic attachment on a pallet.
u Strap the hydraulic attachment to the pallet using
suitable strapping (see illustration in chapter Trans-
port using a forklift truck).
u Place the pallet with the hydraulic attachment on an
anti-slip mat.
u Secure the hydraulic attachment to the loading area
with ropes or chains; use any available transport
lugs.
n
Secure the hydraulic attachment on the pallet and the
loading surface as shown in the following illustration.
n
Observe all the applicable national/regional regula-
tions on securing loads.

Table of Contents

Related product manuals