EasyManua.ls Logo

E+E Elektronik EE150 User Manual

E+E Elektronik EE150
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SCOPE OF SUPPLY
• Foraccuratemeasurementitisessentialthatthetemperatureoftheprobeandmainlyofthesensingheadissameasthe
temperatureoftheairtomeasure.
• AvoidmountingtheEE150transmitterinawaywhichcreatestemperaturegradientsalongtheprobe.Ifpossible,EE150shall
beinstalledwiththeentireprobeinsidetheduct.Forinstallationwithmountingflange,incaseofdifferenttemperatureinside
andoutsidetheduct,theprobepartoutsidetheductshallbethermallyisolated.
• Thedeviceandmainlythesensingheadshallnotbeexposedtoextrememechanicalstress.
• Donotattempttoremovethefilercap,whichisfixed.Avoidtouchingthesensingheadatalltimes.
• ThestainlesssteelprobeisESDsensitiveandshallbehandledassuch.Donotconnectittothegroundpotential.
CAUtiOn
USER‘S GUIDE
COnnECtiOn diAgrAm
EE150 - Humidity and Temperature Transmitter for HVAC applications
5
6
(class III)
(class III)
T-passive connection
for HT3xxx/HT6xxx
EE150-HT3xxx
EE150-HT6xxx
dimEnSiOnS / mOUnting
CABLE GLAND M16x1.5
80.8 (3.18)
56 (2.2)
63 (2.48)
55.3 (2.18)
39.5 (1.56)
ø 5 (ø 0.2)
ø 4 (ø 0.16)
ø 6
(ø 0.24)
ø 7
(ø 0.28)
42 (1.65)
28.55
(1.12)
200
(7.87)
drilled hole for
mounting: ø>9 (ø>0.35)
Dimensions: mm (inch)
setupandadjustmentinterface(withEE-PCA)
setupandadjustmentinterface(withEE-PCA)
• EE150transmitter,typenumberaccordingtoorder(fororderingguideseedatasheetatwww.epluse.com/EE150)
• CableglandM16x1.5
• Mountingflange,PC,Ø6.0mm
• TestreportaccordingtoDINEN10204–2.2

Other manuals for E+E Elektronik EE150

Question and Answer IconNeed help?

Do you have a question about the E+E Elektronik EE150 and is the answer not in the manual?

E+E Elektronik EE150 Specifications

General IconGeneral
Measurement ParametersRelative humidity and temperature
Humidity Range0 to 100 %RH
Protection ClassIP65
Output Signal4 to 20 mA, 0 to 10 V
Power Supply10 to 30 VDC
Operating Conditions0 to 100% RH
Weight200 g

Summary

Scope of Supply

Safety and Handling Precautions

Connection Diagrams

EE150-HT6xxx Setup Interface

Describes setup and adjustment interface for EE150-HT6xxx models with EE-PCA.

EE150-HT3xxx Setup Interface

Describes setup and adjustment interface for EE150-HT3xxx models with EE-PCA.

Dimensions and Mounting

Technical Data

Setup and Adjustment

Regulatory Information

USA FCC Notice

Compliance statement for FCC Part 15 Class B digital devices.

Canadian ICES Notice

Compliance statement for Canadian ICES-003 Issue 5.

Related product manuals