Need help?Do you have a question about the EPOCH BATTERIES 12300A-V2 and is the answer not in the manual?
Explains the manual's purpose for safe installation, operation, and maintenance of the battery pack.
Specifies that procedures are for qualified individuals to mitigate risks and ensure performance.
Highlights that following safety guidelines is crucial for maintaining warranty and ensuring safety.
States Epoch Batteries disclaims liability for damages arising from non-compliance with manual guidelines.
Covers ventilation, dry environment, sunlight avoidance, stable temperatures, accessibility, and safety codes for installation.
Securely mount the battery upright in a stable position using appropriate hardware.
Covers ensuring correct polarity and basic series/parallel configuration for system setup.
Details busbar systems, daisy-chaining, and series-parallel configurations for battery arrays.
Explains Victron GX connection, cable management, and overcurrent protection for safe integration.
Covers powering on the battery, compatible chargers, and charge control features for efficient charging.
Details specific voltages, limits, initial full charge, and monitoring the charging process.
Emphasizes optimal temperature, safe environment, and user precautions during charging.
Covers activating discharge, optimal operating conditions, and managing discharge depth for performance.
Provides guidelines for storage, standby use, regular maintenance, and disconnection when idle.
Emphasizes careful handling, safety precautions, and seeking professional advice.
Covers visual checks of casing, terminals, wiring, and cleaning procedures for battery upkeep.
Details securing connections, voltage monitoring, and capacity evaluation for optimal performance.
Includes temperature checks, preventive maintenance, storage, safety practices, and expert consultation.
Diagnoses problems like battery not charging, low voltage, or overheating.
Addresses short circuits, abnormal behavior, failure to hold charge, and self-discharge.
Covers erratic behavior and outlines when to seek professional assistance.
Details the duration, scope, and exclusions of the battery's limited warranty.
Outlines the procedure for warranty claims, limitation of liability, and user rights.
Provides contact details for the Epoch Batteries customer support team for assistance.
Advises retaining proof of purchase and contacting support for warranty doubts or clarifications.
General| Nominal Voltage | 12.8V |
|---|---|
| Charge Voltage Range | 14.2V |
| Float Voltage Range | 13.6~13.8V |
| Max Charge Current | 300A (600A @ 10s) |
| Recommended Charge Current | 80A |
| Max Discharge Current | 300A (600A @ 10s) |
| Recommended Discharge Current | 100A |
| Short Circuit Protection | 1200A @ 500μs |
| Low Voltage Disconnect | 10V |
| Reconnect Voltage | 12V |
| Nominal Energy @ 0.2C | 3.84kWh |
| Nominal Capacity @ 0.2C | 300Ah |
| Internal Resistance @ 1kHz AC | ≤30mΩ |
| Max Series Connections | 4 |
| Max Parallel Connections | 4 |
| Communications | Bluetooth |
| Terminal and Torque | M10 |
| IP Rating | IP21 |
| Operational Temperature Range | -20°C to 60°C (-4°F to 140°F) |
| Operational Altitude | <3000m |
| Recommended Storage Environment | 15°C to 35°C (59°F to 95°F) |
| Self-Discharge Rate | ≤3%/month |
| Cycle Life | >4000 cycles @80%DOD |
Weight and Dimensions| Length | 391±2 mm (15.4″) |
|---|---|
| Width | 206±2 mm (8.1″) |
| Height | 282±2 mm (11.1″) |
| Weight | 30kg (65lb) |
To Next Page
