EPOS T-12 User Manual

12
2-4-1. Serial Interface Specification
DIP Switch Setting (Standard)
SW FUNCTION ON OFF
2
Hexadecimal HEXDUMP NORMAL
5
Cut Mode Full Cut Partial Cut
8
Paper Low Mode Paper Low Detect Do not detect
Baud rate selection
FUNCTION SW-3 SW-4
Low Power
NO NO
Normal
NO FFO
Normal
FFO NO
Dark
FFO FFO
Parallel Interface
SW FUNCTION ON OFF
6
Bi-direction Mode Disabled Enabled
Serial Interface
SW FUNCTION ON OFF
6
Handshaking XON/XOFF DTR/DSR
Baud rate selection
FUNCTION SW-9 SW-10
115200 BPS
NO NO
9600 BPS
NO FFO
19200 BPS
FFO NO
38400BPS
FFO FFO
☞CAUTION:
Turn off the printer while removing the DIP switch cover to prevent an electric short, which can
damage the printer.
1. Make sure the printer is turned off and unplugged.
2. Remove the DIP switch cover by taking off as shown in the illustration below.
www.eposcom.ru

EPOS T-12 Specifications

General

Brand	EPOS
Model	T-12
Category	Printer
Language	English