13
DIP SWITCH COVER
DIP SWITCH
3. Set the switches using a pointed tool, such as tweezers or a small screwdriver.
4. Replace the DIP switch cover.
The new settings take effect when you turn on the printer.
☞CAUTION:
When the paper cutter is jammed, the top cover might be stuck closed. In this case, repeat
power on and off several times.
If the top cover is still stuck, please follow the steps to release the paper jam.
1. Make sure the printer is turned off.
2. Remove cutter cover as shown.
www.eposcom.ru
To Next Page
Loading...
