Epsolar LS3024B - User Manual

To Next Page

LS1024B / LS2024B/ LS3024B

——

Solar Charge Controller

Thank you very much for selecting our product!

This manual offers important information and

suggestions with respect to installation, use and

troubleshooting, etc. Please read this manual carefully

before using the product and pay attention to the

safety recommendations in it.

EPSOLAR

USER MANUAL

Need help?

Do you have a question about the Epsolar LS3024B and is the answer not in the manual?

Summary

Important safety and installation advice before setting up the solar charge controller.

Diagram and instructions for connecting solar charge controller components.

Explanation of status indicators and their meanings on the charge controller.

Methods and options for programming and configuring the solar charge controller.

Details on the various protection mechanisms built into the charge controller.

Common faults, possible reasons, and troubleshooting steps for the solar charge controller.

General

Model	LS3024B
System Voltage	12V/24V Auto
Rated Charge Current	30A
Max. PV input voltage	50V
Self-consumption	≤ 10mA
Operating Temperature	-35°C to +55°C
Load Control	Yes
Max Load Current	30A
Display	LCD
Type	Solar Charge Controller
Max. PV input power	390W (12V) / 780W (24V)
Battery Type	Gel
Protection	Short-circuit, Reverse polarity
Temperature Compensation	-3mV/°C/2V (default)