Setting Up Your System for Network Printing 21
6. Do one of the following:
❏ If you are using DHCP to assign an IP address to the printer, enter the printer’s
Host Name or IP address, shown on the network status sheet, in the Printer Name
or IP Address text box. Then click Next.
❏ If you manually assigned an IP address to the printer using the control panel or
arp/ping method, enter the printer’s IP address, shown on the network status
sheet, in the Printer Name or IP Address text box. Then click Next.
7. Make sure that the Standard and Generic Network Card are selected, and then click
Next.
To Next Page
Loading...
