4
EMP-S1 User’s Guide
Before Using the Projector
Part Names and Functions
Front/Top
• remote control infrared receiver s P. 9
Receives signals from the remote control.
• ventilation outlet
• lens cover
Attach when not using the projector to prevent
the lens from becoming dirty or damaged.
• focus ring s P.2 3
Adjusts the image focus.
• front foot (left) s P.24
Another front foot is located on the
right side.
Extend and retract to adjust the
projection angle.
• foot button (left) s P.2 4
Another foot button is located on the
right side.
Press both feet buttons when
extending and retracting the front
feet.
• speaker
• handle
Pull out this handle to use
when carrying the projector.
• control panel s P. 5
To Next Page
