Epson AcuLaser M1400 Series User Manual (English)

Other manuals for Epson AcuLaser M1400 Series

User Guide106 pages

Safety Information Guide182 pages

Questions and Answers:

K
Kelly PattersonAug 17, 2025
How to fix Epson AcuLaser M1400 when print media misfeeds occur?
- D
  Daniel SanchezAug 17, 2025
  To address print media misfeeds with your Epson Printer, ensure the paper is properly inserted in the multipurpose feeder (MPF). For thick paper, use paper that is 163 gsm or less, and for thin paper, use paper that is 60 gsm or more. If using envelopes, load them correctly in the MPF as instructed. Correct any deformed envelopes or use another envelope. If performing manual duplex printing, ensure the print media is not curled. Fan the print media, and if it's damp, turn it over or use print media that is not damp.
P
Pamela GreenAug 20, 2025
What to do if my Epson Printer job did not print or prints incorrect characters?
- R
  Rebecca WilliamsAug 20, 2025
  If your Epson Printer isn't printing or is printing incorrect characters, make sure the (Ready) LED is lit and that print media is loaded. Verify you're using the correct print driver and USB cable, ensuring it's securely connected. Also, confirm the correct print media size is selected. If you're using a print spooler, check that it hasn't stalled.
F
fperkinsAug 22, 2025
Why is the output from my Epson Printer too light?
- T
  Tracey MonroeAug 22, 2025
  If the output from your Epson Printer is too light, first check the toner cartridge level in the Printer Status window and replace if necessary. Ensure the print media is dry and correct for the printer. Adjust the BTR settings in the Printer Setting Utility for the type of print media used. You can also try changing the Paper Type setting in the print driver and disable Toner Saving Mode.
C
cesar11Aug 25, 2025
What to do if Epson AcuLaser M1400 has print media multiple feeds?
- A
  Andrea BryantAug 26, 2025
  If your Epson Printer is experiencing multiple feeds, ensure the paper is correctly inserted in the multipurpose feeder (MPF). If the print media is damp, use print media that is not damp. Fanning the print media can also help.
J
Jessica WilliamsAug 27, 2025
How to fix toner smears or stains on the back from Epson AcuLaser M1400?
- M
  michaelgloverAug 27, 2025
  If your Epson Printer is producing toner smears, print that comes off, or stains on the back, try changing the Paper Type setting in the print driver to accommodate potentially uneven print media surfaces. Verify you are using the recommended print media. Adjust the temperature of the fusing unit via the Printer Setting Utility to better suit your printing media.
G
George WernerAug 30, 2025
Why does my Epson AcuLaser M1400 have ghosting on the printed result?
- M
  Misty WashingtonAug 30, 2025
  If the printed result from your Epson Printer has ghosting, the print media surface may be uneven. Try changing the Paper Type setting in the print driver. Adjust the temperature of the fusing unit via the Printer Setting Utility. If you are using non-recommended print media, use the print media recommended for the printer.
C
Cynthia ClaytonSep 1, 2025
How to resolve wrinkled or stained output from Epson AcuLaser M1400?
- M
  mariahortizSep 1, 2025
  If the output from your Epson Printer is wrinkled or stained, verify that the correct print media is being used, switching to a new package if excessive wrinkles occur. When using envelopes, ensure the crease is not within 30 mm of the edges; for Com-10 envelopes longer than 220 mm, use a different size; for C5 envelopes longer than 220 mm, load with the flap open and facing up; for Monarch or DL envelopes shorter than 220 mm, load long edge feed with the flap open and facing up. If problems persist, try a different size envelope.
M
Matthew GutierrezSep 4, 2025
What causes random spots or blurred prints on my Epson AcuLaser M1400 Printer?
- R
  Robert NelsonSep 4, 2025
  If the printed result from your Epson Printer has random spots or is blurred, ensure that the toner cartridge is installed correctly. If you are using a non-genuine brand toner cartridge, install a genuine brand toner cartridge.
M
Michael CookSep 6, 2025
How to fix mottled appearance on Epson AcuLaser M1400 printed results?
- M
  Melody HayesSep 6, 2025
  If the printed result from your Epson Printer has a mottled appearance, adjust the transfer bias. Launch the Printer Setting Utility, click Adjust BTR on the Printer Maintenance tab. Adjust the setting for the type of print media being used and click Apply New Settings button. If you use non-recommended print media, use the print media recommended for the printer.
A
Amy PhamSep 9, 2025
How to fix protrudent or bumpy printed surfaces on Epson AcuLaser M1400 Printer?
- K
  Kimberly WarrenSep 9, 2025
  If the printed surface from your Epson Printer is protrudent or bumpy, clean up the fusing unit. Load one sheet of paper on the multipurpose feeder (MPF), and then print a solid image all over paper. Load the printed sheet with the side to be printed on facing down, and then print a blank sheet of paper.