Paper Jam A (Cover A)
1
Note:
When the optional Stacker is installed, raise the
stacker first, then open cover A.
2
Note:
Place the cartridge on a clean, flat surface.
3
Note:
When jammed paper cannot be removed easily, turn
the roller to take tension off the paper, then pull it
straight out.
4
Note:
Insert the cartridge with the arrow mark on the top
of the imaging cartridge facing toward cover A.
5
Note:
If the jammed paper is not found at cover A, open the
MP tray and standard paper cassette to confirm
there is no remaining jammed paper. See “Paper Jam
MP A, Paper Jam C1 A, Paper Jam C2 A, Paper Jam
C3 A (All paper cassettes and Cover A).”
To Next Page
Loading...
