40 Network Setup
8. When you see this screen, select a wireless network setup method, then click
Next.
Tip:
If you need help selecting a wireless network setup method, click Which option
should I choose for more information on setup methods.
Do not connect the USB cable yet.
9. At the next screen, click Next.
10. Do one of the following:
■ If you selected Using temporarily USB cable connection, continue
following the instructions on the screen.
■ If you selected Using printer buttons, continue with “Setting Up With
the Control Panel” on page 41.
Note:
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup
continue. Do not select Ask Me Later, Keep Blocking, or Block.
To Next Page
Loading...
