6. Remove all the paper from the product.
7. Unplug any connected cables.
8. Close the output tray.
9. Lower the control panel.
10. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product. Make sure the box adequately protects the product control panel.
Keep the product level during transportation. Be sure to remove the tape and transportation lock, and
store the transportation lock as shown before turning on your product.
If print quality has declined when you print again, clean and align the print head.
Parent topic: Cleaning and Transporting Your Product
Related concepts
Print Head Cleaning
Print Head Alignment
294
To Next Page
Loading...
