3. Pull both paper set levers forward until the paper guides retract and lock open to allow paper
loading.
4. Take a stack of paper (up to 50 sheets) and fan it. Next, tap the side and bottom edges of the paper
on a flat surface to even up the stack.
5. Insert the paper stack printable side down along the left paper guide.
6. Adjust the right paper guide so that it matches your paper’s width. Make sure the position of the
guide allows the paper to move up and down freely.
7. Push back the paper set levers to clamp the paper against the guide rollers.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User’s Guide
Options and Consumables 129
To Next Page
Loading...
