Why is my Epson Printer printing strange symbols?
If your Epson printer prints strange symbols, incorrect fonts, or other inappropriate characters, it means that your printer and computer are not communicating correctly. Make sure that you use the correct interface cable and that the communications protocol is correct.
What to do if Epson C11CF39403 Printer printout is pale?
If your Epson printer's printout is pale, it could be due to the printing speed being set to Ultra high speed draft (USD). Change the printing speed setting. Another potential cause is a worn-out ribbon. Replace the ribbon cartridge.
What to do if Epson C11CF39403 Printer printout is faint?
If your Epson printer's printout is faint, it might be because the paper-thickness lever is set incorrectly for your paper. Move the paper-thickness lever to a lower setting. Also, the ribbon could be worn out; in this case, replace the ribbon cartridge.
Why does my Epson Printer not load single sheets of paper?
If the Epson printer does not load single sheets of paper or does not feed paper properly, the paper may be stuck together with static electricity. Fan the paper well before you use it.
Why is the printout faint on my Epson C11CF39403 Printer?
If the printout from your Epson printer is faint, the paper-thickness lever might be set incorrectly for your paper. Move the paper-thickness lever to a lower setting.
What to do if paper release lever is set to the wrong position in Epson C11CF39403?
If the paper release lever is set to the wrong position on your Epson printer, set the paper release lever to the position for the paper source you want to use. If paper from another paper source is currently in the paper path, press the Load/Eject button to eject the paper; then move the paper release lever to the desired position.
What to do if continuous paper is not fed to the standby position in Epson C11CF39403?
Tear off the printed page at the perforation. Then press the Load/Eject button on your Epson printer. The printer feeds the paper to the standby position.
What to do if the print head is overheated in Epson C11CF39403?
Wait for a few minutes; the Epson printer resumes printing automatically once the print head cools.
What to do if Epson C11CF39403 prints on (or too far away from) the perforation of continuous paper?
Adjust the tear-off position using the Micro Adjust function.
What to do if Epson Printer has lines of dots missing in the printout?
If you notice lines of dots missing in your Epson printer's output, it indicates that the print head is damaged. Stop printing and contact your dealer to have the print head replaced.
To Next Page
General