Printer Specifications
Mechanical
Printing method: 24-pin impact dot matrix
Printing speed: Ultra high speed draft 550 cps at 10 cpi
High speed draft 487 cps at 10 cpi
584 cps at 12 cpi
Draft 366 cps at 10 cpi
439 cps at 12 cpi
549 cps at 15 cpi
Letter quality 121 cps at 10 cpi
145 cps at 12 cpi
Printing direction: Bidirectional logic seeking for text and graphics printing. Unidirec‐
tional text or graphics printing can be selected using software com‐
mands.
Line spacing: 4.23 mm (1/6-inch) or programmable in 0.0706 mm (1/360-inch)
increments
Printable columns: LQ-590II/LQ-590IIN:
80 columns (at 10 cpi)
LQ-2090II/LQ-2090IIN:
136 columns (at 10 cpi)
Resolution:
Maximum 360 × 180 dpi (Letter quality)
Paper feed methods: Friction (front, rear)
Push tractor (front, rear)
Pull tractor (front, bottom, rear)
Push and pull tractor (additional tractor is required) (front, rear)
CSF Bin1/Bin2 (optional)
Roll paper holder (optional)
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User’s Guide
Product Information 144
To Next Page
Loading...
Need help?
General