The printer does not feed continuous paper to the standby position.
Cause What to do
You have not torn off the printed pages before
pressing the Load/Eject button.
Tear off the printed pages at the perforation. Then press the Load/
Eject button to feed the paper backward to the standby position.
Network problems
The printer does not print when using a network.
Cause What to do
The network setting is wrong. Check whether or not print jobs from other computers are being
printed through the network.
When the print job is executed, the printer or your computer may
have a problem. Check the connection between the printer and
your computer, settings on the printer driver, and settings of your
computer.
When the print job is not executed, network settings may be
incorrect. Ask your network administrator for help.
Correcting USB Problems
If you are having difficulty using your printer with a USB connection, read the information in this
section.
If your printer does not work correctly with the USB cable, try following solutions:
❏ Make sure that the cable you are using is a standard, shielded USB cable.
❏ If you are using a USB hub, connect the printer to the first tier of the hub, or connect the printer
directly to the computer’s USB port.
Clearing a Paper Jam
Follow these steps to clear a paper jam:
!
Caution:
Do not pull the jammed paper when the printer is on.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User’s Guide
Troubleshooting 112
To Next Page
Loading...
Need help?
General