What to do if the paper release lever is set to the wrong position in Epson Printer?
Set the paper release lever to the correct position for the paper source you want to use. If paper from another source is in the path, eject it by pressing the Load/Eject button; then move the lever.
What to do if single sheet paper is not fully ejected from Epson C11CF39403?
Press the Load/Eject button on your Epson printer to eject the sheet.
What to do if continuous paper is not fed to the standby position in Epson C11CF39403?
Tear off the printed page at the perforation. Then press the Load/Eject button on your Epson printer. The printer feeds the paper to the standby position.
What to do if the print head is overheated in Epson C11CF39403?
Wait for a few minutes; the Epson printer resumes printing automatically once the print head cools.
What to do if an unknown printer error has occurred on Epson C11CF39403?
Turn off the Epson printer and leave it off for several minutes; then turn it on again. If the error occurs again, contact your dealer.
What to do if the interface cable is broken or twisted in Epson Printer?
Check that the interface cable is not broken or twisted. If you have another interface cable, replace the cable and check whether the Epson printer works correctly.
What to do if Epson C11CF39403 driver is not installed correctly?
Check that the Epson printer driver is installed properly. If necessary, reinstall the printer driver.
What to do if Epson Printer does not feed continuous paper to the standby position?
Tear off the printed pages at the perforation. Then press the Load/Eject button to feed the paper backward to the standby position.
Why is my Epson Printer not working and the control panel lights are off?
If your Epson printer does not work and the control panel lights are off, first, ensure the printer is turned on. The Power light should illuminate. If it's already on, verify that the power cord is securely plugged into both the electrical outlet and the printer itself. If the issue persists, try using a different electrical outlet, as the current one may not be functional.
What to do if Epson Printer is hung-up?
If your Epson printer is hung-up (stopping in abnormal situations), turn it off and wait for a while. Then, turn the printer on again, and start printing.
To Next Page
General