186
You see a screen like this:
4. Enter a fax number or select a number from the Contacts or Recent list.
5. Select the Fax Settings tab.
6. Select Send Fax Later.
7. Select On.
8. Select Time, use the numeric keypad on the LCD screen to enter your desired time, and select OK,
then select OK again.
9. Select the Recipient tab and select Send.
Note: To cancel faxing, select Cancel.
After scanning your originals, your product dials the number and sends the fax at the specified time.
Note: If the product is turned off at the specified time, the fax is sent when it is powered on.
Parent topic: Sending Faxes from the Product Control Panel
Related topics
Setting Up Contacts and Contact Groups
Placing Originals on the Product
To Next Page
Loading...
