Contact our Support Team:
www.choose2rent.com/help
+1 (800) 622-6484 Ext. 3 (USA)
+49 40 226 360 - 590 (Europe)
7. Install the Dispense Tray beneath the
media dispenser and snap the left &
right notches into the setting.
8. Adjust the Dispense Tray length by
pulling out the dark grey lever on the
right of the Dispense Tray. Once in the
desired length push the lever back in.
Please DO NOT Return the printer without INK cartridges
installed to avoid physical damages to the unit. INK
Cartridges should be always inside the printer.
To Next Page
Loading...
