What to do if Epson AcuLaser C3900N printing from Acrobat Reader prints part of the image in solid black?
If you are experiencing issues where part of the image prints in solid black, or the print job is interrupted when printing from Acrobat Reader, it may be due to a compatibility problem between Ghostscript and Acrobat Reader. As a solution, try using a different PDF application to print your document.
What to do if Epson AcuLaser C3900N media misfeeds?
To resolve media misfeeds with your Epson printer, ensure the media matches the printer specifications and is flat, especially on the leading edge. Place the printer on a hard, flat, level surface. Store media in a dry location away from moisture and humidity. Always adjust the media guides in the tray after inserting the media. Load the media printing-side up in the tray. Avoid loading media that is folded, wrinkled, or excessively curled. Also, avoid double feeding, loading more than one type/size/weight of media in a tray, and overfilling the trays. Don't allow the output tray to overfill. If the misfeed message persists after clearing the misfeed, open and close the printer’s covers.
Why printing cannot be completed correctly from OpenOffice on Epson Printer?
When printing from OpenOffice or another Office application under Linux, printing issues may arise because these applications have their own print settings, some of which may not be fully supported by the printer. For optimal results, configure paper size and orientation within the application, and use the printer driver (kprinter) for settings like paper type, tray, and resolution.
How to print watermarks from Kword on Epson AcuLaser C3900N?
Due to a bug with Kword, watermarks cannot be printed directly from this application. As a workaround, use the Overlay feature instead.
How to continue printing with a custom paper size on Epson AcuLaser C3900N Printer?
Printing with custom paper sizes is not possible directly from the printer driver. This can only be performed from the command line. Specify the following command to print data: lpr -P [printer_name] -o media=Custom.[WIDTHxLENGTH] [file_name]. The format of Custom.[WIDTHxLENGTH] can be Custom.150x200mm, Custom.8x11in, Custom.15x20cm, or Custom.612x782 (postscript points). The specified file must be a PS, PDF or JPEG file.
General| Print Speed (Black) | 35 ppm |
|---|---|
| Print Speed (Color) | 35 ppm |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Memory (Maximum) | 512 MB |
| Connectivity | USB, Ethernet |
| Network Connectivity | Ethernet |
| Printer Type | Laser Printer |
To Next Page
