Hard Disk Drive (C12C824511)
If you install a Hard Disk Drive, the followings can be performed:
❏ Collate printing
❏ Job printing/saving
❏ Fonts/forms download
❏ User Authentication/Account Track
❏ Direct printing
Installing the Hard Disk Drive
Note:
It’s very important to protect the printer controller board and any associated circuit boards from
electrostatic damage. Before performing this procedure, review the antistatic caution on “Antistatic
Protection” on page 146. In addition, always handle circuit boards by the edges only.
1. Turn off the printer and disconnect the power cord and interface cables.
2. Using a screwdriver, remove two screws.
AcuLaser C3900 Series User’s Guide
Installing Accessories 149
To Next Page
Loading...
