Why does my Epson Aculaser C1600 feed several sheets at once?
If several sheets of paper are feeding through your Epson printer at once, it's likely due to uneven paper edges or moisture. Remove the paper, align the edges, and reload. If the paper is damp, replace it with a fresh, dry stack.
What to do if Media misfeed message stays on Epson Aculaser C1600 Printer?
If your Epson printer displays a media misfeed message, it means some paper is stuck inside. Check the paper path carefully and remove all misfed media.
Why is Media misfeeding in my Epson Aculaser C1600?
Media misfeeding in your Epson printer can occur for several reasons. Make sure the paper is positioned correctly in the tray and that you haven't exceeded the maximum number of sheets. Adjust the media guides to match the paper size. Avoid using warped or wrinkled paper, and replace any moist paper with dry media. If you're using labels or envelopes, ensure they're loaded correctly. Also, use Epson-approved media and clean the media feed roller.
What to do if Epson Aculaser C1600 prints blank pages?
If your Epson printer is printing blank pages, the toner cartridges might be defective or empty. Check the toner cartridges and replace them if necessary. Also, verify that the media type selected in the driver matches the paper loaded in the printer.
Why does my Epson Aculaser C1600 reset or turn off frequently?
If your Epson printer resets or turns off frequently, ensure the power cord is securely plugged into the outlet. Turn off the printer, confirm the power cord is correctly plugged into the outlet, and then turn on the printer. If the issue persists, it could indicate a system error, and you should contact Technical Support with the error information.
Why is Printing taking too much time on my Epson Aculaser C1600?
If printing takes too long on your Epson printer, it might be due to a slow printing mode (like thick stock). Printing with special media takes more time. If using regular paper, ensure the media type is correctly set in the driver. Also, printing may take longer in power-saving mode. Complex jobs naturally require more time, so you may need to wait.
Why does my Epson Aculaser C1600 Printer not print all pages?
If not all pages are printing from your Epson printer, ensure no one pressed the Clear key during the job. Check that the trays are loaded with media, in place, and secure. If you're using an overlay file, print it with a suitable printer driver.
Why does the image come off when rubbed on my Epson Aculaser C1600 Printer?
If the image rubs off easily or there's insufficient fusing on your Epson prints, it could be due to moist media; replace it with dry media. Ensure you're using Epson-approved media. When printing on special media like envelopes, labels, or letterheads, specify the appropriate media type in the printer driver.
Why are there toner smudges or residual images on my Epson Printer?
Toner smudges or residual images on your Epson printer outputs may be due to defective or incorrectly installed toner cartridges. Remove the cartridges and check for damage, replacing if necessary. High printer temperature can also cause this; start the Calibration on the Panel tab of the Remote Panel Program.
Why do lateral lines or bands appear on image from Epson Aculaser C1600 Printer?
Lateral lines or bands on images from your Epson printer can be caused by the printer not being level. Place the printer on a flat, hard, level surface. The media path might be dirty with toner; print several sheets to clear excess toner. Defective toner cartridges can also cause this; remove and check them for damage, replacing if necessary.
Information about toner cartridge types, handling, and precautions.
Detailed steps for replacing individual toner cartridges.
Instructions for replacing the photoconductor unit.
Procedures for cleaning the exterior and interior parts of the printer.
Instructions for cleaning the print head window for optimal print quality.
Explanation of status, warning, error, and service messages indicated by lights.
Guidance on resolving printer errors that prevent normal operation.
Step-by-step procedures for safely removing jammed paper.
Solutions for common issues affecting print quality, like smudges or density.
General| Color | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 600 x 1200 DPI |
| Time to first page (black, normal) | 13 s |
| Time to first page (color, normal) | 22 s |
| Print speed (black, normal quality, A4/US Letter) | 19 ppm |
| Internal memory | 16 MB |
| Maximum input capacity | 200 sheets |
| Envelopes sizes | C6, DL |
| Media weight (tray 1) | 60~209 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), index card, Letter (media size), Legal (media size) |
| ISO A-series sizes (A0...A9) | A4, A5 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Network ready | No |
| Quantity per pack | 1 pc(s) |
| Custom media sizes | (92-216) - (195-356)mm, (92-216) - (186-297)mm |
| Standard media sizes | DIN A4 |
| Supported media weight(s) | 60 - 209 g/m² |
| Compatible operating systems | Windows 2000, XP (32bit / 64bit), Vista (32bit / 64bit), Windows 7 (32bit / 64bit), Server 2003 (32bit / 64bit), Server 2008 |
| First page out (black&white, A4, ready) | 14 s |
| Country of origin | China |
| Maximum duty cycle | 35000 pages per month |
| Storage temperature (T-T) | 0 - 35 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 30 - 85 % |
| Operating relative humidity (H-H) | 15 - 85 % |
| Pallet width | 800 mm |
| Pallet height | 2310 mm |
| Pallet length | 1200 mm |
| Pallet width (UK) | 1000 mm |
| Quantity per pallet | 8 pc(s) |
| Quantity per pallet (UK) | 16 pc(s) |
| Quantity per pallet layer | 2 pc(s) |
| Quantity per pallet layer (UK) | 4 pc(s) |
| Package depth | 580 mm |
| Package width | 480 mm |
| Package height | 455 mm |
| Package weight | 18560 g |
Weight and Dimensions| Dimensions (WxDxH) | 404 x 380 x 275 mm |
|---|
To Next Page