5. Install the dust cover.
Output Tray
All media is fed out facing down into the output tray on top of the printer. This tray has a capacity of
approximately 100 sheets (A4/Letter) of 80 g/m (21 lb) paper.
Note:
If the media is stacked too high in the output tray, your printer may experience media misfeeds, excessive
media curl, or static buildup.
Media Storage
❏ Keep media on a flat, level surface in its original wrapper until it is time to load it.
Media that has been stored for a long time out of its packaging may dry up too much and cause
misfeeding.
❏ If media has been removed from its wrapper, place it in its original packaging and store in a cool,
dark place on a level surface.
❏ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 35˚C [95˚F]), and dust.
❏ Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality.
AcuLaser C1600 User’s Guide
Media Handling 37
To Next Page
Loading...
