1. Ready indicator
2. Error indicator
3. Rotate Toner key
4. Toner indicators
5. Clear key
About the Indicators
The indicators use five types of signals:
❏ Off
❏ On
❏ Slow blinking—1 blink every 2 seconds
❏ Blinking—1 blink per second
❏ Rapid blinking—2 blinks per second
Each of the indicators has the following basic meaning.
❏ Ready indicator
When lit, printing can be performed.
❏ Error indicator
When lit or blinking, an error has occurred or there is a warning.
❏ Toner indicators
When blinking, the toner for the corresponding color is about to run out.
When lit, the toner in the corresponding color is empty.
In addition, printer warnings and errors may be indicated by combinations of the various types of
signals used by the indicators in the control panel (indicator messages).
For details on these indicator messages, refer to “Indicator Messages” on page 68.
The Remote Panel Program can also be used to check the printer status. For details, refer to “Working
with the Remote Panel Program” on page 20.
AcuLaser C1600 User’s Guide
Introduction 10
To Next Page
Loading...
