❏ Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m (24 lb bond) is referred to as thick stock. Test all thick stock to ensure
acceptable performance and to ensure that the image does not shift.
You can print continuously with thick stock. However, this could affect the media feed, depending on
the media quality and printing environment. If problems occur, stop the continuous printing and
print one sheet at a time.
Capacity Tray 1
Up to 50 thick stock sheets, depending on their thickness
Orientation
Face up
Driver Media Type
Thick Stock 1
Thick Stock 2
Weight
Thick Stock 1: 91 to 163 g/m (25 to 43.5 lb bond)
Thick Stock 2: 164 to 209 g/m (43.6 to 55.6 lb bond)
DO NOT use thick stock that is
❏ Mixed with any other media in the trays (as this will cause printer misfeeding)
Envelope
Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the
front, back, and flap. Anything printed in these layered regions may be lost or faded.
You can print continuously with envelope. However, this could affect the media feed, depending on
the media quality and printing environment. If problems occur, stop the continuous printing and
print one sheet at a time.
Capacity Tray 1
Up to 10 envelopes, depending on their thickness
Orientation
Face up
Driver Media Type
Envelope
AcuLaser C1600 User’s Guide
Media Handling 28
To Next Page
Loading...
