❏ Coated with a processed surface (such as carbon paper, and colored paper that has been treated)
❏ Carbon backed
❏ Unapproved iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and
heat-press transfer paper)
❏ Cold-water-transfer paper
❏ Pressure sensitive
❏ Designed specifically for inkjet printers (such as superfine paper, glossy film, and postcards)
❏ Already been printed on by another printer, copier, or fax machine
❏ Dusty
❏ Wet (or damp)
Note:
Keep media between 15% and 85% relative humidity. Toner does not adhere well to moist or wet
paper.
❏ Layered
❏ Adhesive
❏ Folded, creased, curled, embossed, warped, or wrinkled
❏ Perforated, three-hole punched, or torn
❏ Too slick, too coarse, or too textured
❏ Different in texture (roughness) on the front and back
❏ Too thin or too thick
❏ Stuck together with static electricity
❏ Composed of foil or gilt; too luminous
❏ Heat sensitive or cannot withstand the fusing temperature (180˚C [356˚F])
❏ Irregularly shaped (not rectangular or not cut at right angles)
❏ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
❏ Acidic
AcuLaser C1600 User’s Guide
Media Handling 27
To Next Page