EasyManua.ls Logo

Epson Aculaser C1600 - Replacing a Toner Cartridge

Epson Aculaser C1600
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note:
For optimum print quality and performance, use only the corresponded TYPE genuine Epson toner
cartridges.
Keep toner cartridges:
In their packaging until you’re ready to install them.
In a cool, dry location away from sunlight (due to heat).
The maximum storage temperature is 35˚ C (95˚ F) and the maximum storage humidity is 85%
(noncondensing). If the toner cartridge is moved from a cold place to a warm, humid place,
condensation may occur, degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.
Level during handling and storage.
Do not hold, stand or store cartridges on their ends or turn them upside down; the toner inside the
cartridges may become caked or unequally distributed.
Away from salty air and corrosive gases such as aerosols.
Replacing a Toner Cartridge
Note:
Be careful not to spill toner while replacing a toner cartridge. If toner spills, immediately wipe it off with a
soft, dry cloth.
When the toner is empty, the toner indicator lights up. Follow the procedure described below to
replace the toner cartridge.
AcuLaser C1600 User’s Guide
Replacing Consumables 39

Table of Contents

Related product manuals