Epson AcuLaser C3900N - Interface Menu

INTERFACE MENU
With this menu, interface settings can be specified.
Note:
❏ Restart the printer after changing settings in the ETHERNET menu.
❏ If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the password must be entered in order
for the contents of INTERFACE MENU to be displayed. For details on LOCK PANEL, refer to “SYS
DEFAULT MENU” on page 46.
Items Settings (default in bold)/Description
JOB TIMEOUT
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being
received.
ETHERNET TCP/IP ENABLE
YES/NO
IP ADDRESS
*1
000.000.000.000
Set the IP address for this printer on the network.
If the IP address is manually specified, DHCP, BOOTP
and ARP/PING are automatically set to OFF.
SUBNET MASK
*1
000.000.000.000
Specify the subnet mask for the network.
DEFAULT GATEWAY
*1
000.000.000.000
Specify the IP address of the router if one is on the
network.
DHCP
*1
ON/OFF
Select whether or not the IP address is automatically
acquired.
BOOTP
*1
ON/OFF
Select whether or not the IP address is automatically
acquired.
AcuLaser C3900 Series User’s Guide
Printer Control Panel and Configuration Menu 43