Note:
❏ The front lever should be securely returned to its original position; otherwise, the front cover of
the printer cannot be closed.
❏ If it is difficult to operate the lever, push it in.
17. Close the front cover.
Note:
When closing the front cover, press the area of the cover with small projections.
Replacing the Waste Toner Bottle (0595)
When the waste toner bottle becomes full, the message WASTE TONER FULL/REPLACE BOTTLE
appears in the message window. The printer stops and will not start again until the waste toner bottle is
replaced.
1. Open the printer’s front cover.
AcuLaser C3900 Series User’s Guide
Replacing Consumables and Maintenance Parts 93
To Next Page
Loading...
