Epson AcuLaser C3900N - Replacing a Photoconductor Unit

Replacing a Photoconductor Unit
Type Parts Number
Photoconductor Unit (Yellow) 1201
Photoconductor Unit (Magenta) 1202
Photoconductor Unit (Cyan) 1203
Photoconductor Unit (Black) 1204
Note:
Do not touch the OPC drum surface. This could lower image quality.
If P/U LOW on the SYS DEFAULT MENU/ENABLE WARNING is set to ON, the message P/U LOW X (where
“X”. represents the color of the toner) appears when a photoconductor unit becomes near empty.
Follow the steps below to replace the photoconductor unit.
Note:
You are advised to replace the indicated photoconductor unit when the message P/U LIFE X appears.
1. Check the message window to see which color photoconductor unit needs replacing.
2. Open the printer’s front cover.
AcuLaser C3900 Series User’s Guide
Replacing Consumables and Maintenance Parts 87