Media Storage
❏ Keep media on a flat, level surface in its original wrapper until it is time to load it.
Media that has been stored for a long time out of its packaging may dry up too much and cause
misfeeding.
❏ If media has been removed from its wrapper, place it in its original packaging and store in a cool,
dark place on a level surface.
❏ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 35˚C [95˚F]), and dust.
❏ Avoid leaning media against other objects or placing it in an upright position.
Before using stored media, do a trial print to check print quality.
AcuLaser C3900 Series User’s Guide
Media Handling 80
To Next Page
Loading...
