❏ Print on the back side of paper that has already been printed on
Note:
❏ Use paper that has been printed on with this printer.
In addition, the page printed with this setting is not guaranteed.
❏ Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color laser printer/copier
- Paper that has been printed on with any other printer or fax machine
Layout Tab
The Layout tab allows you to
❏ Print several pages of a document on the same page (N-up printing)
❏ Print a single copy for enlargement and print several pages (PCL printer driver only)
❏ Specify booklet printing (Epson AcuLaser C3900DN only)
❏ Rotate the print image 180 degrees
❏ Specify duplex (double-sided) printing (Epson AcuLaser C3900DN only)
❏ Specify whether or not blank pages are printed (PCL printer driver only)
❏ Adjust the binding margin
❏ Adjust the printing position (PCL printer driver only)
❏ Specify the position on the paper where the document is to be printed
Cover Page Tab
The Cover Page tab allows you to
❏ Print front and back cover pages and separator pages
❏ Specify the tray that contains the paper for the front and back cover pages and separator pages
AcuLaser C3900 Series User’s Guide
Using the Printer Driver 25
To Next Page
Loading...
