Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel message window. They provide
information about your printer and help you locate many problems. When the condition associated
with a displayed message has changed, the message is cleared from the window.
Standard Status Messages
This message... means... do this...
CALIBRATING After replacing a toner cartridge or a
photoconductor unit, or after rebooting
your printer after environmental changes,
your printer automatically pauses to do an
Auto-Image Density Control (AIDC) cycle.
This process is provided to make reliable
printer operation with optimum output
quality possible.
No action needed.
CANCELLING JOB The job is being cancelled. No action needed.
COPYING The printer is printing with the collating
function.
No action needed.
ENERGY SAVER The printer is in Energy Saver mode to
reduce power consumption during periods
of inactivity. When a print job is received,
the printer returns to normal power.
No action needed.
FIRMWARE UPDATE The firmware is being updated. No action needed.
INITIALIZING The printer is being initialized. No action needed.
PRINTING The printer is printing. No action needed.
PROCESSING The printer is processing data. No action needed.
READY The printer is on and ready to receive data. No action needed.
REBOOTING The printer is being restarted. No action needed.
WARMING UP The printer is warming up. No action needed.
OFFLINE The printer is offline. To print on a network,
change the TELNET setting
so it is online.
AcuLaser C3900 Series User’s Guide
Troubleshooting 140
To Next Page
Loading...
