Weight
60–90 g/m
Duplexing
See “Print Media” on page 58 for supported sizes.
Use special paper that is
❏ Approved for laser printers
DO NOT use special paper that is
❏ Not approved for use as plain paper
Printable Area
The printable area on all media sizes is up to 4.2 mm from the edges of the media.
a
a
a
a
a=4.2 mm
*
* Printable Area
Each media size has a specific printable area (the maximum area on which the printer can print clearly
and without distortion).
This area is subject to both hardware limits (the physical media size and the margins required by the
printer) and software constraints (the amount of memory available for the full-page frame buffer).
The printable area for all media sizes is the page size minus 4.2 mm from all edges of the media.
Note:
When printing in color on legal-size media, the following limitations apply.
❏ The printable area is 347.2 mm from the leading edge of the paper. (However, there is a
non-printable area up to 4.2 mm from the leading edge.)
AcuLaser C3900 Series User’s Guide
Media Handling 68
To Next Page
Loading...
