Loading Media
Note:
❏ Do not mix media of different types and sizes, as this will cause media misfeeds or machine trouble.
❏ Paper edges are sharp and may cause injuries.
When refilling media, first remove any media remaining in the tray. Stack it with the new media, even
the edges, then reload it.
Tray 1 (Manual Feed Tray)
For details on the types and sizes of media that can be printed from Tray 1, refer to “Print Media” on
page 58.
1. Open Tray 1.
2. Slide the media guides to provide more space between them.
AcuLaser C3900 Series User’s Guide
Media Handling 70
To Next Page
Loading...
