3
3
1
1
2
If “Right Binding” is selected, the pages can be folded as a right-bound booklet.
1. Load plain paper into the tray.
2. From the printer driver, specify duplex (double-sided) printing (Layout tab in Windows).
3. Click OK.
Note:
With autoduplexing, the back side is printed first, and then the front side is printed.
Output Tray
All printed media is output to the face-down output tray on top of the printer. This tray has a capacity
of approximately 200 sheets (A4/Letter) of 80 g/m paper.
Note:
❏ If the media is stacked too high in the output tray, your printer may experience media misfeeds,
excessive media curl, or static buildup.
❏ If the paper curls and falls out of the output tray when printing thick paper, extend the paper stopper
at the end of the tray extension before printing.
AcuLaser C3900 Series User’s Guide
Media Handling 79
To Next Page
Loading...
