Basic Operation
47
6
Pull the paper along the right edge guide.
7
Place your hand on the paper to flatten it, and
slide the movable edge guide against the
paper.
8
Insert the paper into the paper feed slot until
paper feeding starts automatically.
Do not load backing paper that has no labels on it. The
paper may not be detected and not be fed automati-
cally.
9
Close the paper cover.
10
Hold down the Feed button until the leading
edge of paper touches the table on which the
printer is installed.
CAUTION
If the movable edge guide is not properly
slided against the paper, print position may
become incorrect or a paper jam may occur.
Make sure to follow the guidelines below.
• There should be no gap between the guide
and the paper edge.
• Do not slide the guide against the paper too
tightly.
To Next Page
Loading...
