按住
（电源）按钮直至（电源）
LED 指示灯亮起，
以打开打印机电源。设置语言和日期 / 时间，然后选
择使用的黑色墨水类型。
Hold down the (power) button until the (power) LED
lights up to turn on the printer.
Set language and date/time, then select which type of black
ink you use.
安装墨盒，然后等待直至注墨完成并显示确认屏幕。
Install the ink cartridges following the on-screen instructions,
and then wait until ink charging is nished and conrmation
screen is displayed.
注意 /
Caution
开始注墨后，则无法更改黑色墨水类型。
Once you start charging ink, you cannot
change the black ink type.
将 CD 插入计算机。遵循屏幕指示安装打印机驱动程序
并连接打印机。
Insert the CD in the computer. Follow the on-screen
instructions to install the printer driver and connect to the
printer.
在打印机驱动程序中进行纸张设置，然后在打印机上
装入纸张。
请查看视频（QR 码）或 CD 中的用户指南。
Make the paper settings on the printer driver, and then load
paper on the printer.
See the video (QR code) or the User's Guide in the CD.
ColorWorks
C6XXX
CW-C6XXX
https://support.epson.net/p_doc/790/
19 分钟
19 min.
www.epson-biz.com/
©Seiko Epson Corporation 2020.
版权所有
. Printed in XXXXXX/YYYYYYYYYYYY
To Previous Page
Loading...
Need help?
General
