7
English
Network setting "Basic" screen
Item Explanation
Projector name The name of the projector. The name set here is displayed in the projector list
when connected.
EMPxxxxxx (xxxxxx is a specifi c number) is displayed. Change it to an easy to
remember name.
Enter alphanumeric characters.
Enter example: EPSON001
PJLink Password Not necessary to set.
Web Control Password Not necessary to set.
Projector keyword When set to "ON", a keyword must be entered when connecting to the network.
This can prevent computers from making unscheduled connections and
interrupting presentations.
Usually this should be set to "ON".
Network setting "Wireless LAN" screen
Item Explanation
Connection mode Set "Quick Connection Mode".
Antenna level Displays the electromagnetic wave strength for the wireless LAN.
Wireless LAN system Set the wireless LAN system as either "802.11g/b" or "802.11a".
ESSID Displayed as "EPSON". You can change it or leave it as it is.
DHCP
Not necessary to set.
IP address
Subnet mask
Gateway address
DNS server (primary)/DNS server
(secondary)
In "Quick Connection Mode" one computer can connect to one projector (1 to 1 connection).
To Next Page
Loading...
Need help?
General
