Using Multi-Screen Display
36
The allocated image is projected
The following explains how to allocate the computer image using 28 page
"Arrangement example 1".
A
Select the number of the virtual displayg to allocate
to "Display", and set which image to be projected
from which projector.
B
Click "Connect".
The image allocated to each projector is projected.
In a Windows environment, you cannot view the image being sent
to a virtual display on the computer. To adjust the image on the
virtual display, you must do so while viewing the projected image.
To perform mouse-based operations on the virtual display, move
the mouse pointer in the direction of the virtual display, such that
the pointer appears on the virtual display.
Procedure
To Next Page
Loading...
