64
Setting Image and Movie File Display Conditions and Operation Mode
You can set the display conditions and operation mode for playing
back image or movie files as a Slide show in PC Free.
A
Use the [ ] buttons to position the cursor on the
folder where display conditions are to be set. Select
"Option" in the displayed menu and press the
[Enter] button.
B
Make your desired settings on the displayed option
screen.
Enable settings by positioning the cursor on the target item and
pressing the [Enter] button.
Details of the items are given below.
C
Use the [ ] buttons to position the cursor over
"OK" and press [Enter].
The settings are applied.
If you do not want to apply the settings, position the cursor on
"Cancel" and press the [Enter] button.
Procedure
Display order You can set the order of the files to be displayed.
You can select sorting of the files into either file
name order or revision date order.
Continuous
Play
You can determine whether to repeat the Slide
show.
Screen
switching time
You can set the time for a single file to be displayed
when running a Slide show. You can set a time
between "No" (0) and 60 seconds. When you set
"No", auto play is disabled.
Effect This sets the transition effects between files.
To Next Page
Loading...
