EasyManuals Logo

Epson EB-2247U User Manual

Epson EB-2247U
203 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Projector Connections
24
a
You may not be able to project correctly, depending on the model
and settings of the smartphone or tablet.
You may not be able to connect an MHL cable to all devices. Contact
the manufacturer of your smartphone or tablet device to check if
your device supports MHL.
a
Connect the MHL cable to your device's Micro-USB port.
b
Connect the other end to the projector's HDMI2/MHL port.
Attention
If you connect an MHL cable that does not support the MHL standard, the
smartphone or tablet device may become hot, or leakage or explosion may
happen.
The connected smartphone or tablet begins charging when images are
projected. If you connect using a commercially available MHL-HDMI
conversion adapter, charging the smartphone or tablet device may not
work or you may not be able to perform operations using the
projector's remote control.
a
Charging may not work when using a lot of power, such as
when playing a movie.
Charging does not work when the projector is in standby mode
or the battery in a smartphone or tablet is depleted.
a
If images are not projected correctly, disconnect and then reconnect
the MHL cable.
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the
projector.
a
If the port on the device you connect has an unusual shape, use the
cable supplied with the device or an optional cable to connect to the
projector.
The cable differs depending on the output signal from the connected
video devices.
Some video devices are capable of outputting different types of
signals. See your video device manual to confirm what type of signals
can be output.
gg Related Links
"Connecting to an HDMI Video Source" p.24
"Connecting to a Component-to-VGA Video Source" p.25
"Connecting to a Composite Video Source" p.26
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector
using an HDMI cable and send the image source's audio with the projected
image.
Attention
Do not turn on the video source before connecting it to the projector. Doing so
could damage the projector.
a
Connect the HDMI cable to your video source's HDMI output port.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-2247U and is the answer not in the manual?

Epson EB-2247U Specifications

General IconGeneral
Matrix size0.67 \
Number of colors1.073 billion colors
Native aspect ratio16:10
Projection distance1.5 - 8.9 m
Vertical scan range200 - 240 Hz
Projection technology3LCD
Contrast ratio (dynamic)-
Contrast ratio (typical)15000:1
Screen size compatibility30 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, vertical-30 - 30 °
Projector brightness (economic mode)2410 ANSI lumens
Lamp power230 W
Light source typeLamp
Lamp power (economic mode)- W
Service life of light source5500 h
Service life of light source (economic mode)12000 h
FocusManual
Throw ratio1.39 - 2.23:1
Zoom capabilityYes
Focal length range23 - 38.4 mm
Aperture range (F-F)1.5 - 2
3DNo
Color modes (2D)Cinema, Dynamic
Video processing10 bit
Video color modesBlackboard, Dynamic, Photo, Presentation, sRGB
Composite video in1
USB connector typeUSB Type-A, USB Type-B
HDMI connector typeFull-size
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity3
Component video (YPbPr/YCbCr) in0
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)29 dB
RMS rated power16 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Power sourceAC
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)331 W
Power consumption (economy mode)227 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Cables includedAC, VGA
Bundled softwareEpson Projector Management Software, EasyMP Multi PC Projection
Pallet width800 mm
Pallet height6870 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet72 pc(s)
Quantity per pallet layer6 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth282 mm
Width309 mm
Height90 mm
Weight3200 g
Package depth390 mm
Package width170 mm
Package height385 mm
Package weight4.39 g

Related product manuals