Epson EB-2255U - Focusing the Image Using the Focus Ring

Focusing the Image Using the Focus Ring
55
You can correct the focus using the focus ring.
You can also use the projector's Focus Help screen to fine-tune your focus
adjustments (EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W/EB-
2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG).
The Focus Help screen lets you correct the projected image under the
following conditions:
• Screen size is 100 inches or less
• Projection distance is about 1.5 to 3.0 m (EB-2265U/EB-2255U/EB-2250U)
• Projection distance is about 1.5 to 3.4 m (EB-2245U)
• Projection distance is about 0.9 to 3.0 m (EB-2165W/EB-2155W)
• Projection distance is about 0.9 to 2.8 m (EB-2065/EB-2055/EB-
X550KG/EB-X500KG)
• Projection angle is about 20º right or left, or 30º up or down
• The projection environment is not too bright
a
Turn on the projector and display an image.
b
Press the [Focus Help] button on the control panel to display the Focus
Help screen.
c
Rotate the focus ring until the two orange circles overlap in the center
of the Focus Help screen.
d
Press [Focus Help] or [Esc] to exit the screen.