a
• When any pair of adjacent [ ], [ ], [ ], or [ ] buttons are
pressed at the same time, the pointer can be moved diagonally.
• If the mouse button settings are set to reverse on the computer, the
operation of the remote control buttons will also be reversed.
• The Wireless Mouse function does not work under the following
conditions.
- When Extended - USB Type B is set to anything other than
Wireless Mouse/USB Display (EB-595Wi/EB-585Wi/EB-575Wi
only).
- When projecting images from a device connected to the HDMI1/
MHL ports using an MHL cable.
- When displaying the Configuration menu or help.
- When operating functions other than the Wireless Mouse function
(such as adjusting the volume).
However, when using the E-Zoom or Pointer function, the page up
or down function is available.
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo.
You can use the registered user's logo as a display when projection starts or
no image signal is being input.
s Extended - Display p.132
a
• Once a User's Logo has been saved, the logo cannot be returned to
the factory default.
• If the content of the Configuration menu is set from another
projector using the batch setup function, the registered User's Logo
is set for the other projectors. Do not register confidential
information and so on as the User's Logo.
s
"Performing Batch Setup for Multiple Projectors" p.147
a
Project the image you want to save as the User's Logo, and then
press the [Menu] button.
s "Using the Configuration Menu" p.125
Using remote control Using the control panel
b
Select User's Logo from Extended.
Projection Functions
106
To Next Page
Loading...
Need help?
General
Weight and Dimensions
